News

Apr 02, 2023

Enhancing the linear flow of fine granules through the addition of elongated particles

Scientific Reports volume 5,

Scientific Reports volume 5, Article number: 16071 (2015) Cite this article

1611 Accesses

4 Citations

Metrics details

Sandglasses have been used to record time for thousands of years because of their constant flow rates; however, they now are drawing attention for their substantial scientific importance and extensive industrial applications. The presence of elongated particles in a binary granular system is believed to result in undesired flow because their shape implies a larger resistance to flow. However, our experiments demonstrate that the addition of elongated particles can substantially reduce the flow fluctuation of fine granules and produce a stable linear flow similar to that in an hourglass. On the basis of experimental data and previous reports of flow dynamics, we observed that the linear flow is driven by the "needle particle effect," including flow orientation, reduced agglomeration and local perturbation. This phenomenon is observed in several binary granular systems, including fine granules and secondary elongated particles, which demonstrates that our simple method can be widely applied to the accurate measurement of granular flows in industry.

A sandglass is a timing instrument that relies on the constant flow of sand1. These devices have been investigated for thousands of years, providing a convenient system to gain specific insights into fundamental scientific issues of granular flow behavior. In line with the poem that states, "to see a world in a grain of sand…"2, granular materials are important in various processes and display many peculiar intrinsic phenomena3,4,5,6. In the process of granular investigations over the past two centuries, the classic phenomena7,8 and typical experimental works9,10 have been mainly related to coarse and cohesionless particles whose diameters are larger than several hundred micrometers. However, mounting evidence11 indicates that more attention should be paid to the widespread application of fine granules in almost every aspect of our lives. For example, fine granular linear flows such as that of an hourglass are used in food production, chemical engineering and pharmaceutical manufacturing to directly control the quality of the resulting product.

Nonetheless, granular flow remains a complicated scientific problem. Numerous unresolved flow mechanisms require extensive investigation12,13,14. The oscillatory phenomena reported in the sand hourglass have been confirmed by experiment and numerical simulations15,16 and are attributed to air-solid interactions and spontaneous sand organization. The flow fluctuations related to flow parameters such as porosity, coordination number, velocity magnitude and stress17 have been quantitatively studied by using a 2D discrete model and three regimes in the hourglass18 have been obtained from investigations concerning the effect of an interstitial fluid on granular discharge. Vivanco et al.19 have ascribed velocity fluctuations to an intermittent network of arches and strong force chains. Strong interparticle forces naturally form an inhomogeneous distribution of threadlike force chains20,21. Furthermore, force chains that propagate along a string of particles are likely to form an arch that can resist a certain pressure and prevent solid movement22,23. With respect to the jamming transitions of a granular system, Majmudar24 and Valverde25 have observed a power law behavior between the stress and the volume fraction and have reported that the granular jamming probability decreases with increasing ratio between the outlet diameter and particle size26.

Aeration and vibration27 have been demonstrated to improve fine granular flow. Common belief would suggest that the presence of needle-like particles in a binary granular mixture could negatively affect the flowability because needle-like shapes exhibit a high mobility resistance factor. In this letter, we report that the addition of needle-like particles to a fine powder gives rise to a linear flow that is analogous to that of an hourglass; we also systematically elucidate the transition mechanism. This counterintuitive result provides us an opportunity to carry out pioneering work in this area.

For different binary granular systems, the weight-loss curves are plotted as a function of the elongated particle mass fraction (w) in Fig. 1a,c,e; the shape of the curves gradually transitions from terrace-like to linear with increasing w and the best linear flow is observed at approximately 10–15 wt%. The occurrence of discontinuous flow indicates that a periodic time exists during the flow. There are zero velocity points for many cases that correspond to the arching state1. In contrast to the case of a fluid, the flow rate is independent of the bed height, except for the last few centimeters. The addition of needle particles improves the linearity of the weight-loss curve during the whole discharge process. As w increases, the vibration amplitude and sequential periodicity decrease (Fig. 1b). The time series of the fluctuating flow rate in Fig. 1 shows that a low-magnitude fluctuation velocity and linear weightlessness curve are obtained with the increase of w. In Fig. 2a, the granular flow degree of linearity (δ) decreases rapidly upon the addition of rice straw, which corresponds to the transition of the flow from instability to continuous, corresponding to its weightlessness curve. In addition, the trend of the fluctuation intensity (I) is similar to that of δ, both of whose minimum values are in the approximate range of 10 to 15%. This result means that the granular flow under the optimized addition amount is analogous to that in an hourglass, which is often used as a method to measure the passage of time. The decreased fluctuation also indicates steady granular flow.

The flow behavior curves of different binary granular systems from a D0 = 32 mm aperture.

(a) The loss weight curves of glass bead-columnar particle blend, (b) The fluctuation velocity of glass bead-columnar particle blend, (c) The loss weight curves of coal-columnar particle blend, (d) The fluctuation velocity of coal-columnar particle blend, (e) The loss weight curves of coal-rice straw blends, (f) The fluctuation velocity of coal-rice straw blend.

The fluctuation parameters as a function of needle particle mass fraction.

(a) δ vs w, (b) I vs w.

Interestingly, we find that the phenomenon is observed for several binary granular systems, which allows us to extract constitutive relations. A detailed comparison demonstrates that the addition of needle particles to a cohesive powder enhances the linear flow dynamics. This observation may be a universal phenomenon.

The addition of elongated particles to a fine powder positively affects the linear flow of the fine particles and the best linear flow is observed at an elongated-particle content of approximately 10–15 wt%. This phenomenon is referred to as the "needle particle effect" on the basis of the observation and the needle-like shape of the secondary particles. From microscopic to macroscopic granular systems, we theoretically and experimentally analyze the mechanism of the needle particle effect on the basis of the decreased agglomeration, needle particle orientation and macroscopic flow pattern.

With an increase in w, the fine particles will adhere to the needle particles because of interparticle forces (Fig. 3). The interparticle cohesion is reduced upon the formation of large particle, which, in turn, leads to a decrease in the contact forces. Meanwhile, the needle particles flow in a uniform vertical orientation, in line with the flow direction near the hopper outlet, avoiding the arch due to mechanical interactions (Fig. 4). On the microscropic level, the flow fluctuation of the cohesive powder is mainly controlled by an intermittent network of arches and complex force chains28. Because of their large aspect ratio and orientation, needle particles possess a perturbation length and their back-and-forth vibration could make the stress transmission more uniform21. We argue that the transmission of stress arises from a combination of uniform orientation and effective packing. Because of their needle-like shape, the particles behave as fibers that are widely spread throughout the binary granular system. Each needle particle is analogous to a stress magnet that attracts more fine particles because of its similar stress direction. Therefore, the role of needle particles in a fine powder system is analogous to the role of a policeman dealing with a traffic jam.

Images of agglomeration and adhesion states.

(a) Pulverized coal, (b) fine coal adhere on the rice straw surface, (c) glass bead, (d) fine glass bead adhere on the columnar particle.

The orientation of needle particle in the evolution of granular flow pattern.

(a) at the stationary state, (b) flow state after 0.5 second.

Our work reveals another surprising observation: the flow is enhanced in the range , where b is the width of the needle particles and d is the diameter of the host particles. As the needle particle diameter decreases, it decreases the perturbation surface and intensifies the complexity force chain, thus increasing the flow resistance force. For large needle particles, the flow granular system should comply with the criterion (where D is the inner diameter of the hopper and D0 is the outlet diameter) because of the dimensional effect.

To quantitatively characterize the transition of the flow pattern, the agglomeration strength (σp) is introduced to indicate the degree of clustering; σp is defined as , where ε is the porosity of the granular system, F is interparticle force and d is coal particle diameter. Notably, d is the granular diameter after adhesion due to the vertical orientation and small number of needle particles. In our previous work, we deduced the following equation: , where c is the cohesion strength, which can be measured by using an FT-4 powder rheometer and A is the cross-sectional area of a horizontal section. Thus, σp can be expressed as . Here, the decrease in σp is mainly attributed to the penetration and adhesion of elongated particles. When the mass fraction exceeds a certain value, both the cohesion and diameter increase because of the increased mechanical interactions. Thus, the combined effect produces a small change in σp. The quantitative results in Fig. 5 are consistent with the previous discussion of the flow behavior.

σp as a function of w.

The predominant mechanism resulting in the unstable discharge of cohesive powder is a multi-alternative arching stage and break-arching stage; i.e., the presence of oscillating flow is produced by instability arches. Figure 6 exhibits an overview of this phenomenon. Because of its strong interparticle bonds, the fine powder is likely to form an arch near the hopper outlet and this arch can sustain a certain stress. This arch may break because of its weight and because of the stress from the particles above. The oscillation process is the direct reason for the unstable flow rate, which corresponds to the results in Fig. 6a17,19. The addition of needle particles could effectively decrease the force intensity, thereby shattering the arch to generate continuous flow. When the concentration of needle particles is high, mechanical interactions may play a substantial role in resisting the granular flow.

The comparison between arch and continuum flow for different samples.

(a) Pulverized coal, (b) Coal- rice straw blend (15 wt% rice straw).

The results of this study contradict the conventional belief that needle particles generate undesirable flow behavior because their large aspect ratio results in mechanical effects. Interestingly, the optimized addition of needle particles can effectively improve the flow behavior of fine powders, resulting in linear flow in the hopper. As described in ref. 3minute pressure fluctuations can tentatively lead to flow cessation in an hourglass. In an unconfined hopper, we expect that decreased agglomeration strength and flow orientation could be regulated by the linear flow of fine granules. The adhesion of fine particles and the needle particle vertical orientation produce a small cohesive force, which lessens the probability of the arching and jamming phenomena. The penetration of needle particles into the dense cohesive powder could further break the instability arch and result in stable flow. The decreased agglomeration strength provides intuitive evidence of the transition from intermittent flow to continuous flow. Hence, given our results and the evidence presented in the literature27, we conclude that the addition of needle particles can effectively improve the flow linearity of fine granules. On the basis of our previous research, when the w of the secondary needle particles exceeds an appropriate scope, the flow characteristics worsen because of strong mechanical effects. Thus, to obtain the required flow behavior, a moderate amount of secondary particles should be added.

In summary, the addition of a small amount of needle particles to a cohesive powder improves the linear flow, similarly to that in an hourglass. From a practical viewpoint, this work could be widely used in production applications because of the widespread use of granular flow and the importance of flowability. For the transition from intermittent flow to continuous flow, we have uncovered the dominant mechanism. Rather than aeration and mechanical methods, the addition of secondary particles improves the stable flow because of its inertness to chemical conversion. Most importantly, this approach could be applied in the manufacture of pharmaceuticals, which demands accurate measurements, opening a new approach to complete the granular theoretical framework.

To confirm the needle particle effect, we chose pulverized coal, fine glass beads, rice straw and a column made of PVC. The Sauter diameters of the coal and glass beads were 22.1 μm and 17.9 μm, respectively. The aspect ratios of the rice straw and column were 4.31 and 5.39 and their widths were 325 μm and 395 μm, respectively. Because the moisture content is a key factor affecting the flow properties of a powder, the moisture content of the experimental material was controlled to be less than 2%, as measured by an MA150 infrared moisture meter.

The experimental system (Fig. 7) consisted of a transparent hopper, a weigh-sensor system and a high-speed camera. The experiments were conducted on the premise that granular flow was steady and continuous. In our previous study, the hopper was demonstrated to satisfy the experimental standard through the investigation of gravity discharge. Its structural parameters were as follows: a column diameter of 150 mm, a cone with a half-opening angle of 15°, an outlet diameter of 32 mm and a height of 220 mm. To capture the clear needle particle orientation, a two-dimensional hopper (width of 1.5 cm) and a high-speed camera were used. The width of the hopper was five times the longest length of the needle particles, which avoided the particle vertical orientation because of the dimensional effect. To analyze the stability of the discharge rate, an online dynamic weight system was used to record the hopper weight change. The data can be used to construct a variation-of-mass curve. Microimages of the blends were collected by a scanning electron microscope to confirm the occurrence of adhesion.

The schematic diagram of the experimental system.

To accurately quantify the fluctuations in granular flow, the average flow rate can be written , where m is the total weight of the samples and t is the flow time. The degree of linearity (δ) is defined as , where Δmmax is the maximum deviation between the instantaneous mass and the linear mass. The instantaneous velocity (Wt) is defined as , where mi and ti are the instantaneous mass and time, respectively. The fluctuation velocity (W′) can be calculated by . To quantify the flow stability, the fluctuation intensity (I) can be expressed as .

Cohesion (c) corresponds to the intercept of the yield locus on the shear stress axis, which is often composed of the resistance from the mutual biting of granules and the united effect of condensation and colloids. It can be obtained after the shear test.

How to cite this article: Guo, Z. et al. Enhancing the linear flow of fine granules through the addition of elongated particles. Sci. Rep. 5, 16071; doi: 10.1038/srep16071 (2015).

Wu, X. L., Måløy, K. J., Hansen, A., Ammi, M. & Bideau, D. Why hour glasses tick. Phys. Rev. Lett. 71, 1363–1366 (1993).

Article ADS CAS Google Scholar

Jaeger, H. M. & Nagel, S. R. Physics of the granular state. Science 255, 1523–1531 (1992).

Article ADS CAS Google Scholar

Zuriguel, I., Boudet, J. F., Amarouchene, Y. & Kellay, H. Role of fluctuation-induced interactions in the axial segregation of granular materials. Phys. Rev. Lett. 95, 258002 (2005).

Article ADS CAS Google Scholar

Banigan, E. J., Illich, M. K., Stace-Naughton, D. J. & Egolf, D. A. The chaotic dynamics of jamming. Nature Physics. 9, 288–292 (2013).

Article ADS CAS Google Scholar

Royer, J. R. et al. High-speed tracking of rupture and clustering in freely falling granular streams. Nature 459, 1110–1113 (2009).

Article ADS CAS Google Scholar

Goldfarb, D. J., Glasser, B. J. & Shinbrot, T. Shear instabilities in granular flows. Nature 415, 302–305 (2002).

Article ADS CAS Google Scholar

Möbius, M. E., Lauderdale, B. E., Nagel, S. R. & Jaeger, H. M. Brazil-nut effect: Size separation of granular particles. Nature 414, 270 (2001).

Article ADS Google Scholar

Kudrolli, A., Wolpert, M. & Gollub, J. P. Cluster Formation due to Collisions in Granular Material. Phys. Rev. Lett. 78, 1383–1386 (1997).

Article ADS CAS Google Scholar

Daerr, A. & Douady, S. Two types of avalanche behaviour in granular media. Nature 399, 241–243 (1999).

Article ADS CAS Google Scholar

Frei, P. & Church, M. How river beds move. Science 325, 1509 (2009).

Article Google Scholar

Matsusaka, S., Kobayakawa, M., Mizutani, M., Imran, M. & Yasuda, M. Bubbling behavior of a fluidized bed of fine particles caused by vibration-induced air inflow. Sci. Rep. 1190, 01190 (2013).

Article Google Scholar

Chaudhuri, P., Mansard, V. & Colin, A. Dynamical flow arrest in confined gravity driven flows of soft jammed particles. Phys. Rev. Lett. 109, 036001 (2012).

Article ADS Google Scholar

Tamas, B. et al. Orientational order and alignment of elongated particles induced by shear. Phys. Rev. Lett. 108, 228302 (2012).

Article ADS Google Scholar

Pouliquen, O. Velocity correlations in dense granular flows. Phys. Rev. Lett. 93, 248001 (2004).

Article ADS CAS Google Scholar

Manger, E., Solberg, T., Hjertager, B. H. & Vareide, D. Numerical simulation of the ticking hourglass. Int. J. Multiphase Flow. 21, 561–567(1995).

Article CAS Google Scholar

Pennec, T. L. et al. Ticking hour glasses: experimental analysis of intermittent flow. Phys. Rev. E. 53, 2257 (1996).

Article ADS Google Scholar

Mollon, G. & Zhao, J. Characterization of fluctuations in granular hopper flow. Granul. Matter. 15, 827–840 (2013).

Article CAS Google Scholar

Muite, B. K., Hunt, M. L. & Joseph, G. G. The effects of a counter-current interstitial flow on a discharging hourglass. Phys. Fluids 16, 3415–3425 (2004).

Article ADS CAS Google Scholar

Vivanco, F., Rica, S. & Melo, F. Dynamical arching in a two dimensional granular flow. Granul. Matter. 14, 563–576 (2012).

Article Google Scholar

Liu. C. H. et al. Force fluctuations in bead packs. Science 269, 513–515 (1995).

Article ADS CAS Google Scholar

Ostojic, S., Somfai, E. & Nienhuis, B. Scale invariance and universality of force networks in static granular matter. Nature 439, 828–830 (2006).

Article ADS CAS Google Scholar

Luding, S. Granular media: Information propagation. Nature 435, 159–160 (2005).

Article ADS CAS Google Scholar

Majmudar, T. S. & Behringer. R. P. Contact force measurements and stress-induced anisotropy in granular materials. Nature 435, 1079–1082 (2005).

Article ADS CAS Google Scholar

Majmudar, T. S., Sperl, M., Luding, S. & Behringer, R. P. Jamming transition in granular systems. Phys. Rev. Lett. 98, 058001 (2007).

Article ADS CAS Google Scholar

Valverde, J. M., Quintanilla, M. A. S. & Castellanos, A. Jamming threshold of dry fine powders. Phys. Rev. Lett. 92, 258303 (2004).

Article ADS CAS Google Scholar

Kiwing, T., Lai, P. Y. & Pak, H. K. Jamming of granular flow in a two-dimensional hopper. Phys. Rev. Lett. 86, 71–74 (2001).

Article ADS Google Scholar

Lozano, C., Lumay, G., Zuriguel, I., Hidalgo, R. C. & Garcimartín A. Breaking arches with vibrations: the role of defects. Phys. Rev. Lett. 109, 068001 (2012).

Article ADS Google Scholar

Van Hecke, M. Granular matter: a tale of tails. Nature 435, 1041–1042 (2005).

Article ADS CAS Google Scholar

Download references

The authors are grateful for the National Key Technologies R&D Program (2012BAA09B02), Program for New Century Excellent Talents in University (NCET-12-0854).

Key Laboratory of Coal Gasification and Energy Chemical Engineering of Ministry of Education, East China University of Science and Technology, P. O. Box 272, Shanghai, 200237, P.R. China

Zhiguo Guo, Xueli Chen, Yang Xu & Haifeng Liu

Shanghai Engineering Research Center of Coal Gasification, East China University of Science and Technology, P. O. Box 272, Shanghai, 200237, P.R. China

Zhiguo Guo, Xueli Chen, Yang Xu & Haifeng Liu

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

H.F.L. and X.L.C conceived and designed experiments. Z.G.G. and Y.X. performed most experiments and analyzed the data. All authors contributed to discussing the results and writing the manuscript.

The authors declare no competing financial interests.

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article's Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Reprints and Permissions

Guo, Z., Chen, X., Xu, Y. et al. Enhancing the linear flow of fine granules through the addition of elongated particles. Sci Rep 5, 16071 (2015). https://doi.org/10.1038/srep16071

Download citation

Received: 19 November 2014

Accepted: 06 October 2015

Published: 09 November 2015

DOI: https://doi.org/10.1038/srep16071

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

Granular Matter (2020)

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.